Ten top tips for hygienic gasketed plate heat exchangers

Ten top tips to keep your hygienic gasketed plate heat exchanger in tip top condition

  1. Ten top tips to keep your Alfa Laval hygienic gasketed plate heat exchanger in tip top conditionMake sure that the operating conditions (temperatures and flow rates) comply with the design specifications.

  2. At start-up, vent the heat exchanger but open and close the valves slowly to avoid pressure surges and water hammer.

  3. Use upstream filters and strainers to remove particulate fouling and protect the heat exchanger.

  4. Check for any changes in temperature, pressure and any signs of external leaks daily.

  5. On a regular basis keep the tightening bolts clean and well-lubricated.

  6. Use condition monitoring techniques to avoid having to open the plate heat exchanger for inspection.

  7. Use Cleaning-in-Place (CIP) to avoid the need to open the heat exchanger for cleaning.

  8. Always keep stand-by units clean and dry. If a heat exchanger is taken out of service, flush with fresh water and drain it completely.

  9. Protect heat exchangers from water splash. Avoid exposure to ultra violet rays and ozone typically generated from electrical sources.

  10. Only use Alfa Laval genuine spare parts for guaranteed performance, reliability and equipment life. Maintain a stock of essential spare parts and follow the storage instructions.

How can we help you?ご質問がございましたらお気軽にお問い合わせください。

お問い合わせはこちら

Alfa Laval GPHE

Alfa Laval gasketed plate heat exchangers

Alfa Laval 360° Service & Maintenance

How to open and close the Alfa Laval FrontLine & BaseLine gasketed plate heat exchangers

How to change gaskets on Alfa Laval FrontLine & BaseLine gasketed plate heat exchangers

How to change plates on Alfa Laval FrontLine & BaseLine gasketed plate heat exchangers